Specifications include, but are not limited to: Vehicle 1: Truck, F350, SRW, 4x4, super cab, with Animal Control service body: < Engine: Diesel, 6.7 liter V8 minimum, 60”C/A < Min. 11,000# GVWR < Heavy duty - battery, alternator (250 amp), and radiator < Four wheel drive < Shield package < Seating: cloth or leather (No vinyl); Front Bucket seats 40/40 (No Center Seat or Console) < Full Rubber floor (No carpet) < Air Conditioning < Power windows and door locks, remote keyless entry < Trailer towing package with class V receiver hitch, trailer wiring hookups with 7-way plug, and electronic OEM brake controller < Power trailer tow mirrors < Upfitter Switches < 120 Volt/400W Power Outlet < Pickup Bed Delete < Animal Service Body – Hartstra – aluminum o DIMENSIONS: 109”L x 68”H x 80”W Nominal dimensions including skirting o FRAMEWORK: Aluminum Tubing Perimeter and cross-member Framework fabricated and includes 4 Chassis Mounting Points. o BODY CONSTRUCTION: Fabricate Aluminum Tubing Body Framework Wall Sections • Utilize 1.5" x 1/8" Aluminum Square Tubing • Includes Front, Sides and Rear Wall as per drawings • Includes Cutouts for compartments as per design • Includes Skirting for aesthetics Supply and install PolyCor sheeting as exterior wall finish • Utilize Polar white 0.08” PolyCor sheets • Installed using fastenerless adhesive method Fabricate Roof with Standard Aluminum Roof Extrusion with Custom formed corners and 1.5" Roof Bows welded in place at 24" On Center • Roof Skin to be 20Ga Aluminum Sheeting single piece • Apply Coolguard roof coating for UV protection and reflection o BUMPER: Fabricate and Install Step Bumper at rear • Designed to bolt onto Chassis independent of the body • Dimensions to be 12"D x Full Width of Body • Includes Class III Receiver Hitch and 7 prong RV Plug 4" Steel Tubing construction painted Black Includes Safety Tread Plate Decking COMPARTMENTS: Fabricate and Install 6 - Animal Control Compartments • 36”W x 38”H Transverse compartment at front • 34”W x 30”H Center compartment on R.S. for fuel filler • 34”W x 35”H Center compartment on C.S. • 34”W x 38”H Rear compartments on each side • Front compartments to be transverse with center swing divider • Includes Sloped to Center Floors with Drains • All Aluminum Fabrication Unpainted • Includes Exterior Doors Fabricated with Aluminum Extrusion and SS Hinges with Locking Paddle handle Hardware to access • Includes Interior Safety cage Doors fabricated from aluminum and includes catch pole openings and easy operation while securing animals. • Supply and Install Removable ½" Rubber matting in all compartments Fabricate and Install Storage Compartment at rear • Dimensions to be 24"W x 38"H x 60"L Nominal Dimensions • Doors Fabricated with Standard Aluminum door extrusions and SS Hinges and Paddle locking Hardware Fabricate and Install electrical Compartment in skirting at front C.S. • For installation of electrical controller module and fuses Supply and Install SM Styrofoam insulation throughout walls and ceilings Supply and Install SM Styrofoam insulation in floor