Specifications include, but are not limited to: The project will have card and pin readers at the landings and inside the cabins for the main elevators in the lobby. The lobby elevators will grant access to floors 1, 2, and 3. This requires a total of five (5) readers: two (2) cars and three (3) landings. The low voltage vendor has already been awarded and will supply and install cabling up to the elevator cab. The elevator company awarded this project will then be tasked with installing and connecting a cable to the elevator controller and integrating it with the card reader in each elevator, utilizing an existing junction box. The readers for the cabs will need a 3 pair shielded cable. If the distance between the panel and the readers is over 200 feet, it will require an 18 AWG otherwise a 22 AWG is acceptable.