Specifications include, but are not limited to: CMHA is seeking quotes from qualified, licensed independent Contractor(s) with demonstrated professional competence and experience to provide all labor, equipment, goods, and supplies necessary to provide inspection and training services at residential properties and other related services. The residential properties are conventional public housing units subsidized by the U.S. Department of Housing and Urban Development (HUD); properties for this scope consist of family development units and scattered sites. GENERAL REQUIREMENTS 2.1 Inspections shall occur during normal working hours and must be in full compliance with the following regulations: 2.1.1 HUD Public Housing Assessment regulations at 24 CFR §902.20 through 902.26 and 5.703. 2.1.2 Lead based paint regulations at 24 CFR Part 35 2.2 The following inspection services may be requested: 2.2.1 U.S. Department of Housing and Urban Development (HUD) Public Housing Assessment Systems (PHAS) Real Estate Assessment Center (REAC) Protocol and National Standards for the Physical Inspection of Real Estate (NSPIRE) for units including detailed report for all the deficiencies on property to include photographs of deficiencies. 2.2.2 HUD PHAS Protocol and Uniform Physical Condition Standards and/or NSPIRE* for building systems, units, common areas and sites, including detailed report for all the deficiencies on property to include photographs of deficiencies. 2.2.3 **HUD is changing its inspection protocols to NSPIRE. It is expected that the contractor has knowledge and capacity to conduct inspections for both inspections’ standards. 2.2.4 Provide NSPIRE training. Contractor will provide all training material including but not limited to books, handouts, HUD Notices, all labor, equipment, goods, and supplies deemed necessary for training. CMHA’s staff’s training will require credentialing after the course and a test completed with a passing score, to provide the professional certification of NSPIRE V training...