Specifications include, but are not limited to: JACKET/COAT/VEST 1. Jacket/coat/vest patterns must offer unisex patterns to ensure appropriate fit and universal look throughout the entire program. Gender specific jacket patterns are NOT acceptable. 2. Jacket/coat/vest must be available in an extended size range. The size range is 2XS-8XL and is available in short, average and tall lengths. This follows the standards for performance apparel, athletic apparel, and commercial industries. 3. To allow maximum range of athletic movement, all standardized sleeves must be single-part construction to allow for smooth movement and visuals. Common expansion pockets, flanges, or pieced-in patch at underarm are not allowed. This provides a smoother look and greater durability since extraneous seams and or bulk cause friction, chafing, and premature wear. Custom sleeves must meet the same standards. Sleeves with darts are not allowed since they restrict full movement range. Military, European, (high-cut) arms-eyes, or gusset inserts are not allowed. 4. Shoulder pads must be constructed from durable foam and fabric covered. No pleated, ruffled, or gathered fabrics of any sort will be allowed to extend shoulder or substitute for this unique feature. 5. Sleeves must be available with two optional finishes: 1. Standard Finish - Fully-surged / over-lock edge at bottom of sleeve with coverstitch hem finish. 2. Athletic Thumb Hole--stretched thumb hole to allow for a proper sleeve fit regardless of the wearer’s uniform size. Placement ½” - ¼” above finished cuff sized as patterned. 6. Jacket/Coat/Vest construction must consist of overlocked seam joining, single needle set zippers and cover stitched hems on sleeves. All raw edges and seams edge must face into the jacket. Any and all sewn attachments or appliques must have a clean edge finish. Zipper fastenings for closure must be placed as specified in the styling specifications. 7. All collars must be attached to the neckline of coat/jacket/vest catching all layers of shell, chest piece and collar. No free-floating or enveloped plastic is acceptable. 10. Collar must be centered on the coat. BIB PANTS/TROUSERS 1. Bib pant/trouser patterns must offer a unisex pattern for proper fit and ease of garment distribution. 2. Patterns and style must be in keeping with the end use of marching and athletic standards. They have ample room for movement, are non-restrictive, and must have a trim, fitted look. 3. Bib pants/trousers must be available in an extended size range from 2XS-8XL.