Specifications include, but are not limited to: Asphalt maintenance on targeted roadways, which may include base failure repairs, milling, wedge grinding, mix-in-place, overlaying streets, and replacing street markings. Along some of these treated roadways, flat work, such as C&G, sidewalk, and driveway repairs may be required. In addition to asphalt maintenance, two (2) streets will be converted from asphalt to 6” concrete. It is preferred that roadways are functional and carrying traffic the same day of the performed work. (Overnight street closures are not recommended, except for construction of the concrete roadways. Other roadway which may require street closures, shall be discussed with the Project Manager.) Remaining funds under the contract may be redirected by the Street & Drainage Department. • Approximately 23,000 tons of Type D HMAC • Planing and milling • Wedge grinding (7ft minimum, each side) • 6” base failure repairs • 3% mix in place at 6” depth, with RC250 Grade 5 aggregate (0.25 Gal/SY & 1 CY/135 SY), applied prior to overlay • C&G, sidewalks, driveways • 6” concrete pavement (2 locations) • Pavement markings (including the installation of Type 1 Thermoplastic)