Specifications include, but are not limited to: The new EA4 Feeder replacement design shall be rated at 25KV (but energized at 15KV), three phase, 4 wire wye, with 477 aluminum conductor steel reinforced (ACSR) phase conductor & 4/0 ACSR neutral and utilize RUS type 115KV construction. The design shall assume the future installation of a 20 pair fiber optic cable. The Feeder poles shall be primarily wood type Douglas Fir, class type as designed; however, the design may include self-supporting steel poles, provided they can be readily constructed and installed. The new design shall NOT be like-for-like and instead incorporate transmission type design features to meet or exceed the following design objectives: a. Minimize the number of pole structures to address the existing terrain and mitigate lack of accessibility. b. Minimize the number of double dead-end structures as much as practically possible. c. Span top to bottom in canyons by utilizing taller poles. d. Long spans shall be dampened & controlled to mitigate conductor galloping and avoid slapping of phase conductors. e. Strategically place new pole structures to mitigate lack of accessibility or the need to construct temporary roads. f. Utilize the existing right-of-way as much as feasible and possible and stay within Los Alamos County owned property. g. The pole structures shall accommodate a 20 pair fiber optic cable: either below the neutral conductor or on the static wire.