Specifications include, but are not limited to: All materials shall meet the following requirements for a 100% acrylic type, low VOC fast drying, ready-mixed waterborne traffic line paint. The paints shall be suitable for application to either asphaltic or Portland cement concrete pavements. The lines shall be applied with airless or air assisted spray equipment so as to have the paint at a temperature of 160 degrees F maximum in the chat exchanger and 135-150 degrees F at the spray nozzle. The maximum drying time of 20 minutes shall not be exceeded when the pavement temperature is greater than 45 degrees F, under humidity conditions of 85% or less on dry pavement. The paint must be reflectorized for night visibility with drop-on-beads at an equivalent rate of six (6) pounds per gallon and govern by Section 713.08 Glass Beads as per the latest and revised CDOT Standard Specifications for Road and Bridge Construction. The paint shall not contain more than .06% of lead or chromium for yellow and 0% for white. The coverage shall be 100-110 square feet per gallon at 15 mils wet film thickness. Section 713.08 Glass Beads as per the latest and revised CDOT Standard Specifications for Road and Bridge Construction.