Specifications include, but are not limited to: A. Rowan University is seeking a qualified vendor to provide a moving truck for the RowanSOM community, transporting supplies for clinical areas and general storage for campus events. B. Rowan has approved a basis of design for this project. Vendors are welcome to submit alternates that meet or exceed the specifications and features listed below in Table 2.1: Specifications & Features. 1. All proposed equals must be accompanied, at a minimum, with the following for evaluation purposes: a. Manufacturer’s Specification Sheet b. Applicable Product Brochure(s) c. Model Number d. Dimensions e. Warranties 2. Rowan will be the sole determiner of whether or not any proposed equals meet the requirements. C. The contractor must be a franchised and/or authorized factory representative, able to furnish the specified unit. Dealers or agents submitting a proposal may be required to submit a letter of certification from the manufacturer whose product is supplied, certifying that the dealer or agent is authorized by the manufacturer to supply the unit specified. The University reserves the right to request such certification and it will be the responsibility of the vendor to notify Rowan of any changes in certification status. D. Vendors shall provide new units of first quality only. E. This IFB is for the outright purchase of the unit only; leasing of the contract unit or trade-in against the purchase of the contract will not be considered. F. Each unit and its components shall be completely assembled, serviced and ready for use when delivered to the University. Unless specified otherwise; any parts, components, equipment, controls, materials, features, performances, capacities, ratings or designs which are standard and/or necessary to form an efficient and complete working unit shall be furnished whether specifically required herein or not. The contractor shall supply any item not specified herein but deemed necessary for the application and the item must meet the Industry standards and practices, Federal and New Jersey Safety Standards and Regulations, and SAE and other applicable standards.