Specifications include, but are not limited to: General and Technical Requirements for Digital Copiers All digital copiers shall be new with no used or refurbished parts. All copiers shall include options for printing, scanning and if requested faxing. Each Site/Department’s copier needs will determine the final equipment configuration of each unit. The OEM shall provide specification sheets listing all accessories, features, functions and technical requirements of each model copier. 1. Duplexing: All digital copiers shall be capable of producing double-sided copies/prints. 2. Paper: All copiers rated at a speed of 50 prints per minute (ppm) or faster are required to have the capability of printing on stock ranging from 20 lb. bond to 110 lb. index, on sizes letter (8 ½ x 11), legal (8 ½ x 14) and ledger (11 x 17). 3. Finishing: All digital copiers shall have full offset stacking and finishing (50 sheet stapling) capabilities. 4. Document Feeder: Digital copiers 50-90 ppm shall possess an Automated Document Feeder that has dual scan capability and accommodate 100 sheets of 20 lb. bond paper. 5. Bypass Tray: All digital copiers shall have a bypass tray for the purpose of printing on specialized stock. 6. Enlarging: All digital copiers shall be capable of enlarging documents in preset increments to a maximum of 200%. 7. Reducing: All digital copiers shall be capable of reducing documents in preset increments to a minimum of 25%. 8. Paper Capacity: All digital copiers shall have the following paper capacity, using standard 20 lb. copy paper: ▪ 8 ½ x 11 paper supply - minimum of 1,000 sheets ▪ 8 ½ x 14 paper supply - minimum of 500 sheets ▪ 11 x 17 paper supply – minimum of 250 sheets (may be an adjustable tray)