Specifications include, but are not limited to: This work shall consist of the Contractor furnishing and applying liquid asphalt and treated stone on properly prepared Hot-Mix Asphalt Roadways. Bid quantities are approximate only; payment shall be for actual quantities applied to streets. Streets to be stone sealed shall be selected by the Contractor and the Director or his/her Designee. Materials 1. Liquid Cement Asphalt Liquid cement asphalt grades shall be: CRS-2 (3% Latex), CMS-2 (3% Latex), RS-2 (3% Latex), HFMS-2 (3% Latex) or MC3000 conforming to AASHTO specifications M208, M140 or M82. 2. Latex Additive The latex additive shall be Ultrapave 70 (Anionic) or Ultrapave 1156 (Cationic) or equivalent conforming to the following specifications. It is required that the latex be co-milled at the bulk emulsion facility, to ensure complete and balanced blending. The emulsion manufacturing plant must be open to inspection by the awarding authority. 3. Treated Stone Stone shall be crushed quarry stone, free from dust, soft stone or other contaminants, with a minimum of 70% of the stones have a fractured face. All stone shall satisfy a 35% maximum for the L.A. Abrasion Test and a 35% maximum for the Flakiness Index Test. Stone shall be treated prior to application with Liquid Asphalt Material at the rate of 0.2% to 0.5% residual asphalt to ensure uniform treatment of all stones. Proper pre-treatment shall be obtained by a twin shafted Pug mill with a Digital Readout Belt Scale.