Specifications include, but are not limited to: One (1) Tape Library PowerVault TL1000- [Dellstar_11595] or equivalent 3.1.1.1 Tape Library must handle tapes from entry to exit fully automatically storing and loading tapes in the tape drive as needed or directed by the operator. 3.1.1.2 Tape Library must support encryption. 3.1.1.3 Tape Library must be Rack Mountable and include rails for mounting. 3.1.1.4 Tape Library must have a barcode reader for automatic reading tape labels. 3.1.1.5 Tape Library must support firmware updates for all applicable components. 3.1.1.6 Tape Library must have capacity for 9 tapes or more. 3.1.1.7 Tape Library must have a Network interface with Ethernet RJ-45 and be 1GB/s data transfer speed or greater. 3.1.1.8 Tape Library must have an operator control panel and a remote web management system with the following functions: 3.1.1.8.1 Display system status information. 3.1.1.8.2 Option to run system diagnostics. 3.1.1.8.3 Option to check and set system settings. 3.1.1.8.4 Option to verify tape drive operation. 3.1.1.8.5 Option to run an inventory of tapes. 3.1.1.8.6 Option to add or remove tapes from the library. 3.1.1.9 Tape Library must have at least one tape drive compatible with LTO8 tapes or equal. 3.1.1.10 Tape Library must have a DELL two-year limited hardware warranty or equivalent. 3.1.1.11 Tape Library must include SAS 6Gb Port Dell HBA355e Adapter or equal. The HBA must be compatible with a Dell PowerEdge R650 and the tape library and cables. 3.1.1.12 Tape Library must include 6Gb SAS cable of a minimum of 2 meters in length, SAS cable compatible with connecting the tape drive to the HBA.