Specifications include, but are not limited to: 1. CHASSIS a) 2025 Freightliner M2 106 Plus, Tandem Axle - Straight Truck Provision - Chassis color: Red to match Sikkens FLNA3225 - GVRW 58,000lbs - Cummins B6.7 300 hp, 2600 rpm Gov. - Allison 3500 RDS Automatic Transmission with PTO Provision - RT-46-160 46,000# R-Series Tandem Rear Axle - Airliner 46,000# Rear Suspension - Detroit DA-F-12.0-3 12,000# FF1 71.5 KPI/3.74 Drop - Single Front Axle - 12,000# Mono Taperleaf Front Suspension - 106 Inch BBC Flat Roof Aluminum Conventional Cab - 6,850 mm (270 Inch) Wheelbase - 11/32 x 3-1/2 x 10-3/16 Inch Steel Frame - (8.73 mm x 258.8mm/0.344 x 10.19 Inch) 120ksi - 2,450 mm (96 Inch) Rear Frame Overhang - Cab To Axle 204 inches - 6.43 Rear axle - Aluminum Wheels - All season tires - Power Equipment Group 2. APPARATUS BODY a) Morgan Body Dry Freight Van Body - Morgan Body will be approximately 102 inches wide x 295 inches long - Dry Freight Van Body o Subframe 3-inch I-Beam Crossmembers on 12-inch centers with 4 inch longrails Mylar tape is applied between all steel subframe components Extruded aluminum lower bottom rails o Flooring 1 1/8 in laminated hardwood, shiplapped and pre-undercoated o Morgan Standard rear overhead door o Skins 0.40 Aluminum pre painted white o Liner ½ inch plywood, full interior wall coverage o Morgan standard side wall with lightweight aluminum o Roof 0.62 translucent glass board sheet - Three (3) interior LED dome lamps o Switch with indicator mounted in cab dash - Liftgate o Maxon GPTLR55 68 x 86 +10 5,500 lb. capacity o Aluminum platform o Power Down o Galvanized coated o 102-inch wide extension plate with 2 Step Flex Step Bumper - Painted Sikkens FLNA3225 to match chassis - LED Stop/Turn/Tail lights - Exterior Lights o Tecniq S37 LED sealed clearance lights, per Federal Motor Vehicle Safety Standards (FMVSS) Front Corner Caps Side Top Rails Five (5) across rear header - License plate bracket and light located under body - Side Door o One (1) Maximizer Panel Side Door on Curb Side of Body Recessed Step Well One (1) hinged step well cover Courtesy lighting b) Body Compartmentation - Equipment Storage and Mounting o Interior of body to have custom fabricated steel racks and shelving to hold customer required equipment and tools. Racks will be mounted on each side of the apparatus body, leaving room for at least a 36” walkway, and run the full length of the body. o Storage racks will be designed to hold equipment needed to mitigate building and trench collapse rescue emergencies and include the following • Eight (8) pre-made Shoring Panels • Dimensional & LVL Lumber 10 – 4 x 4 x 12 feet 6 – 6 x 6 x 12 feet 10 – 2 x 4 x 12 feet 10 – 2 x 12 x 12 feet 10 – 2 x 6 x 12 feet 4 – 7 x 7 x 12 feet • 30 – Paratech Shores/Struts with associated bases, brackets and tips • Milwaukee Battery Operated Tools • 12-Inch Compound Miter Saw • 10 – 12 inches x 12 inches x 36 inches Poly Boxes • Additional small hand tools and equipment o Exact layout to be finalized at Pre-Construction Meeting. - Four (4) Diamond Plate Underbody Boxes o Four (4) diamond plate underbody boxes with dropdown doors shall be installed. Size of underbody boxes to be 2 feet x 2 feet x 4 feet. o Streetside: One (1) forward the rear wheels, one (1) rearward the rear wheels Underbody boxes will be illuminated with one (1) appropriately sized TecNiq E45 Strip light Forward streetside underbody box will house a Generator Powered Cord Reel holding 100 ft. 10/3 yellow cord and one (1) junction box. o Curbside: One (1) forward the rear wheels, one (1) rearward the rear wheels Underbody boxes will be illuminated with one (1) appropriately sized TecNiq E45 Strip light Forward curbside underbody box will house a Generator Powered Cord Reel holding 100 ft. 10/3 yellow cord and one (1) junction box.