Specifications include, but are not limited to: The Identification Card will be CR80 ISO Standard Plastic Cards. The Identification Card Elements include the following: 1. IDFPR shall have the final approval and acceptance of the design, layout, and general appearance of Identification Cards. The requirements and design document for Identification Cards for IDFPR shall be provided to IDFPR for review and approval by the contract term start date. This includes the requirements document, card, and cover letter design and design document. 2. Vendor shall use facial image processing capability to make the digital photographs provided by IDFPR compliant to the ISO 19794-5 standard. To do so, Vendor will resize and crop the photograph to maintain the distance between the centers of the pupils as the same, for all photographs in the system. It will also correct rotation of the head of up to +/- 5 degrees in every direction (roll, pitch, and yaw). The image will also be checked to ensure its focus, brightness, lightning, and sharpness are within allowable limits. If an image fails to adhere to the criteria set by the ISO 19794-5 standard after all these corrections, it will be rejected. This will ensure that all photographs are clearly discernable for establishing identity. 3. The Vendor shall produce Identification Cards so that the graphics, layout, and quality are consistent between all Identification Cards. Vendor shall produce Identification Cards which are consistent with the current design templates for medical cannabis dispensary agents established by the State of Illinois. A samples of this template may be made available to the agency for approval prior to the contract award. In order to ensure that no variations arise at the time of production, Vendor shall use reliable equipment and consumables that yield the same results each time. All cards and kits shall be visually checked for quality before they are dispatched from the Vendor’s facility. Additional information can be found in Section 1.1.9. 4. The Identification Card will be CR80 ISO Standard Plastic Cards. The services for production of an Identification Card include: • Bi-directional data transfer • Identification Card production • Affixing the Identification Card to the card carrier • Inserting the Identification Card • Protective covering and card carrier into an envelope • Printing and inserting a letter from the agencies and • Addressing and mailing the Identification Card to the Identification Card consumer